abandonpage2001012.jpg
abandonpage2001004.jpg
abandonpage2001005.jpg
abandonpage2001013.jpg
abandonpage2001008.jpg
abandonpage2001007.jpg
abandonpage2001014.gif
abandonpage2001006.jpg abandonpage2001009.jpg
Click on a link below.
The Proper Method of In-Place Abandonment
abandonpage2001016.jpg abandonpage2001010.jpg
abandonpage2001015.jpg
Basic Facts
Misconceptions
What You and Your Home Inspector Should
Know and Look For
abandonpage2001011.jpg abandonpage2001003.jpg abandonpage2001002.jpg
Financial
Assistance
Tank Removal
In the center of the upper left photo, the fill and vent pipe of the 550-gallon UST can be seen. One end of the tank is uncovered. An access hole is cut in the tank. The reflection of the sky on the fuel oil in the UST can be seen in the upper right photo. The oil is then vacuumed out of the tank, and the interior is pressure-washed to remove the sludge. This cleaning of the interior of the UST ensures that, once the tank rusts away, no leakage of oil will contaminate the underlying soils. A sand/cement slurry is then poured into the tank, completely filling the void so that the tank cannot be reused and so that no sinkhole develops when the tank rusts away. As you can see in the lower right photo, when the dirt is put back in place, one would never know that any work was done (the pruning of the shrub was done by the property owner to make my job easier, although it wasn't necessary).
We very likely have the
SOLUTION
to your
PROBLEM
UST
When is Abandonment a Viable Option?
Practically all home heating oil USTs are nonregulated, meaning that once the tank is no longer in use, removal of the tank is not required. Therefore, most home heating oil USTs can be abandoned in-place. However, the tank should never be filled with sand or foam through the fill and/or vent pipe, as it is impossible to completely remove the oil and sludge without cutting the tank open. Also, the property owner should keep in mind that if leakage has occurred and is discovered at a later date, removal of the UST (and contaminated soils) will be required.
abandonpage2001001.jpg
When Sensible Solutions performs in-place abandonment, photographic documentation, as shown above, is provided in a Tank Abandonment Report. The report also includes a copy of the waste disposal manifest for the fluids and sludge removed from the UST. The report is signed and sealed by a NC-licensed geologist, certifying that the tank was properly abandoned.
336-263-0965
P.O. Box 5294, Chapel Hill, NC 27514-5003